Advertisement
Huawei OptiXstar EN8145X6Ns
Quick Start for QR code
No.
1
2
3
4
5
6
7
8
Issue 01 (2022-02-15)
NO TE
● The fiber connector connected to the optical port on the wall varies depending on
actual conditions.
● To ensure normal use of fibers, make sure that the fiber bending radius is larger than 30
mm.
Item
TEL
LAN1-LAN4
USB
Power
Reset
WPS
WLAN
Optical port
Copyright © Huawei Technologies Co., Ltd.
Description
Connects to the ports on a telephone or fax machine.
Connects to PCs or IP set-top boxes (STBs).
Connects to USB storage devices.
Connects to a power adapter.
Press the button for a short time to reset the device, or
press the button for a long time (longer than 10s) to
restore the device to the default settings and reset the
device.
NOTE
Reset Huawei ONTs with caution. Otherwise, the ONTs may
fail to access the Internet. If an ONT cannot access the
Internet after a reset, contact your Internet service provider.
When the WLAN is on, press the WPS button (> 3s) and
release the button to start Wi-Fi protected setup (WPS)
negotiation.
Used to enable or disable the WLAN function
● When the WLAN is off, press the WLAN button (>
3s) and release the button to open the WLAN.
● When the WLAN is on, press the WLAN button (>
3s) and release the button to close the WLAN.
The optical port is equipped with a rubber plug and
connected to a fiber for upstream transmission.
The type of the optical connector connected to the
optical port can be SC/APC.
2 Connecting Cables
4
Advertisement
