Warnings - Graco 965022 Instructions Manual

PLURAL COMPONENT MATERIALS HAZARD
Graco Inc. does not manufacture or supply any of the reactive chemical components that are used in this equip-
ment and is not responsible for their effects. Because of the vast number of chemicals that could be used and
their varying chemical reactions, the buyer and user of this equipment should determine all facts relating to the
materials used, including any of the potential hazards involved. Particular inquiry and investigation should be
made into potential dangers relating to toxic fumes, fires, explosions, reaction times and exposure of human
beings to the individual components or their resultant mixtures.
Graco assumes no responsibility for loss, damage, expense or claims for bodily injury or property damage, direct
or consequential, arising from use of such chemical components.
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and
INSTRUCTIONS result in serious injury.
D This equipment is for professional use only.
D Read all instruction manuals, warnings, tags, and labels before operating the equipment.
D Use the equipment only for its intended purpose. If you are uncertain about usage, call your
Graco distributor.
D Do not alter or modify this equipment. Use only genuine Graco parts and accessories.
D Check the equipment daily. Repair or replace worn or damaged parts immediately.
D Never exceed the recommended working pressure or the maximum air inlet pressure stated on
your pump or in the Technical Data on page 17.
D Be sure that all spray/dispensing equipment and accessories are rated to withstand the maxi-
mum working pressure of the pump. Do not exceed the maximum working pressure of any
component or accessory used in the system.
D Route the hoses away from the traffic areas, sharp edges, moving parts, and hot surfaces. Do
not expose Graco hoses to temperatures above 82° C (180° F) or below -40° C (-40° F).
D Do not use the hoses to pull the equipment.
D Use fluids and solvents that are chemically compatible with the equipment wetted parts. See
the Technical Data sections of all the equipment manuals. Always read the material manufac-
turer's literature before using fluid or solvent in this pump.
D Always wear protective eyewear, gloves, clothing, and respirator as recommended by the fluid
and solvent manufacturers.
D Wear hearing protection when operating this equipment.
D Comply with all applicable local, state and national fire, electrical and other safety regulations.

Warnings

WARNING
WARNING
684002 3