Daikin R410A Split Series Installation Manual page 14

Indoor Unit Installation
2) Attach the conduit to the M conduit mounting
plate.
• Attach the K wire sealing pad (small)
to the conduit, the wiring between
the indoor and outdoor units, and the
ground wiring.
• Loosen the screws (2 points) in part A.
• Insert the hook part of the M conduit mounting
plate into part B and secure the M conduit
mounting plate with the screws loosened
(2 points).
NOTE
Remove the wiring fixture if you have difficulty
performing this step.
3) Connect the wiring into
the electrical wiring
box through the wiring
intake beside the
electrical wiring box.
13
M
Conduit
mounting
plate
M
Wiring intake (low voltage)
Remote controller wiring
Lock nut (field supply)
K
Wire sealing pad (small)
Wiring between the
indoor and outdoor
units, ground wiring
(Viewed from the side)
Wiring fixture
Hook
Conduit
mounting plate

M
Conduit mounting plate
Conduit (field supply)
M
Conduit mounting plate
Conduit (filed supply)
Screws (2 points)
B
A
Screws (2 points)
Wiring intake (high voltage)
Wiring between the indoor and
outdoor units Ground wiring
■
English