Advertisement
zl Module-QSG.fm Page 2 Thursday, February 27, 2014 1:31 PM
Installation guidelines
To avoid personal injury or product damage when installing your switch, read the following installation precautions and
guidelines.
Installation precautions
•
Static electricity can severely damage the electronic components on the modules. When handling and installing the
modules in your switch, follow these procedures to avoid damage from static electricity:
•
Handle the module by its bulkhead or edges. Avoid touching the components, and the circuitry on the board.
•
When installing the module, equalize any static charge difference between your body and the switch by wearing a
grounding wrist strap and attach it to the switch's metal body, or by frequently touching the switch's metal body.
•
HP zl2 Modules have "low-force", high-performance connectors. High insertion forces are not necessary to install the
modules, and should not be used.
•
Ensure you fully insert the modules. That is, press the module into the slot until the bulkhead on the module is
contacting or is very close to contacting the front face of the switch chassis.
•
For safe operation, proper switch cooling, and reduction of electromagnetic emissions, ensure that a slot cover is
installed on any unused module slot. For safety, no more than one slot should be uncovered at a time when the switch
is powered on.
•
Ensure you check the temperature specifications for each module that will be installed into the chassis as different
modules may have different temperature requirements.
•
For additional precautions, see the Installation and Getting Started Guide for your module. For the latest version, visit
the HP Networking Web site at www.hp.com/networking/support.
For additional Safety and Regulatory information, see the HP 5400R zl2 Quick Start Guide and Safety/Regulatory Information
document included with your module.
Interi or Wiri ng
War n in g
© Copyright 2010, 2014 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Printed in Singapore
June 2014
5998-5072
5998-5072
2
Advertisement
