Market Forge Industries UniVerse Skillet 30P-STGL Installation & Operation Manual page 9

UniVerse Skillet™ Gas Tilting Skillets
• Disconnect the power supply to skillet before cleaning or servicing. (Note: "LX" models should have the skillet raised
to washing position before disconnecting power supply.)
• Keep this appliance area free and clear of combustibles.
• Do not obstruct the flow of combustion and ventilation air.
• If skillet pan is difficult to raise, the lift gears may need to be lubricated. The gears are located on the right side under
the control box. Apply a liberal amount of grease along the helical thread of the worm where it engages the worm
gear. Use multi-purpose, NLGI #2 lithium-based, water-resistant grease.
• Keep this manual for future reference.
• Consult the factory, the factory representative, or a local service company to perform maintenance and repairs.
• In the event of a power failure, do not operate appliance.
• Periodically examine the flue outlet located behind the skillet cover for any obstructions.
• Appliances with casters are always to be restrained from movement. If removal of the restraint is necessary, always
reconnect the restraint when the appliance is returned to its originally installed position.
INSTALLATION & OPERATION MANUAL 10158 REV 4 (09/21)
CAUTION: BE SURE TO READ
Operation
9
PAGE OF16