Hitachi SL1 Maintenance Manual page 335

FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of FCC Rules.
reasonable protection against harmful interference in a residential installation.
Since this equipment generates, uses, and radiates the radio frequency, it may cause
harmful interference to the radio communications if not installed or used in accordance
with the instructions set out hereunder.
interference will not occur in a particular installation.
If this equipment causes harmful interference to the radio or television reception, which
can be checked and confirmed by powering the equipment off and on, the users are
encouraged to correct the interference by taking one or more of the following counter-
measures:
1 . Reorient or relocate the receiving antenna.
2 . Give more clearance between the equipment and receiver.
. Connect the equipment into the outlet of other circuit which is different from the
3
one being used for the receiver.
4 . Consult the dealer or experienced radio/television technician for help.
Canadian Compliance
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
"Le presnt appareil numerique n'emet pas de bruits radioelectriques depassant les lim-
ites applicables aux appareils numeriques (de la Class B) prescrites dans le Reglement
sur le brouillage radioelectrique edicte par le ministere des Communications du
Canada."
WARNING
These limits are specified to provide the
However, there is no guarantee that such
1