Paper Exit Roller - Hitachi SL1 Maintenance Manual

7.6.6 Paper Exit Roller

Tools
1
. Phillips Screwdriver #1, #2
Disassembly Procedures
1
. Remove the paper exit unit. (See the item 7.1.5.)
2
. Remove the paper exit cover. (See the item 7.1.5.)
3
. Remove the C ring of both sides (left and right).
4
. Remove the shaft support at the both sides.
5
. Remove the paper exit roller from the frame.
Assembly Procedures
1
. Put a new paper exit roller through the frame's hole.
2
. Install the shaft support of both sides (left and right).
3
. Install the C ring of both sides to the groove of paper exit roller.
Precautions
7-71