Fuser Roller - Hitachi SL1 Maintenance Manual

7.7.2 Fuser Roller

Tools
1
. Phillips Screwdriver #1, #2
Disassembly Procedures : See the layout of fuser unit parts.
1
. Remove the fusing heater lamp (400W). (See the item 7.7.1.)
2
. Remove the set screw FST3 10 (1 pcs.) of F. terminal (R), and remove
F. terminal (R)
3
. Remove the set screw ST3 6 (2 pcs.) of oil pan.
4
. Remove the oil pan.
5
. Remove the set screw ST3 6 (2 pcs.) of frame assembly.
6
. Open the upper face of frame assembly.
7
. Remove the fuser roller from the frame.
Assembly Procedures
1
. Install a new fuser roller to the frame.
2
. After the above, follow exactly the reverse order of disassembling procedures.
Precautions
• Do not touch the surface of fuser roller with bare hands.
• Do not let any foreign particle such as debris adhere to the surface of
fuser roller.
Frame (L)
Fuser Roller
B.B
Fig.7-61
7-82
Frame (R)
B.B