Table of Contents
Advertisement
AOC-SLG4-4X4T Expansion Card User's Guide
3-2
Before Installation
To install the expansion card properly, follow the steps below.
Prior to Installation
1. Power down the system and unplug the power cord.
2. Use industry-standard anti-static equipment (such as gloves or wrist strap)
and follow the precautions on page 3-1 to avoid damage caused by ESD.
3-3
Installing the Expansion Card
1. Once the system is fully powered down, remove the power cords from the
rear of the power supply, and remove the system cover.
2. Verify that the expansion card is equipped with the correct PCIe slot bracket
length for your system. AOC-SLG4-4X4T expansion cards include a low-pro-
file PCIe bracket. However, if your system features full-height PCIe locations,
replace the low-profile bracket with a full-height bracket.
3. Install the add-on card into a PCIe x16 slot on your motherboard and secure
the bracket with the hardware provided.
4. Replace the system cover, plug in the power cord, and power up the system.
3-2
Advertisement
Table of Contents
