Table of Contents
Advertisement
Quick Links
Quick Installation Guide
AirEye
®
READ AND SAVE
THESE INSTRUCTIONS
CAUTION: To reduce risk of personal injury, use only with mounting assembly models 007180, 007262,
009182, 007265, and 008001 manufactured by Big Fans.
TECHNICAL SPECIFICATIONS
Fan Size
20 in. (508 mm)
24 in. (610 mm)
30 in. (762 mm)
36 in. (914 mm)
*Includes fan motor, blades, and cage assembly.
Fan Weight*
100–120 VAC, 1Ф, 50/60 Hz
32 lb (14.5 kg)
200–240 VAC, 1Ф, 50/60 Hz
100–120 VAC, 1Ф, 50/60 Hz
38 lb (17.2 kg)
200–240 VAC, 1Ф, 50/60 Hz
100–120 VAC, 1Ф, 50/60 Hz
45 lb (20.4 kg)
200–240 VAC, 1Ф, 50/60 Hz
110–120 VAC, 1Ф, 50/60 Hz
67.1 lb (30.4 kg)
200–240 VAC, 1Ф, 50/60 Hz
Operating Instructions and Maintenance:
bigfans.com/support
Input Power
Max Amps
Max Power
5.1 A
386 W
3.1 A
392 W
5.2 A
396 W
3.1 A
400 W
5.0 A
384 W
3.0 A
390 W
9.7 A
711 W
5.5 A
669 W
Advertisement
Table of Contents
Related Manuals for BIG ASS FANS AirEye 007180
Summary of Contents for BIG ASS FANS AirEye 007180
- Page 1 Quick Installation Guide AirEye ® READ AND SAVE Operating Instructions and Maintenance: bigfans.com/support THESE INSTRUCTIONS CAUTION: To reduce risk of personal injury, use only with mounting assembly models 007180, 007262, 009182, 007265, and 008001 manufactured by Big Fans. TECHNICAL SPECIFICATIONS Fan Size Fan Weight* Input Power...
-
Page 2: Parts And Hardware
PARTS AND HARDWARE Hinge Pin Eyelets Rear Guard Front Guard Blade Assembly (4) Motor Thru- Bolts (4) Flange (2) Set Nuts** Screws* Main Mounting Hardware Angle Adjustment Hardware (4) Keyhole Mounting Slots Blade Assembly Retainer*** *Pre-mounted to blade assembly. (4) Safety Hinge Pins **Pre-mounted to motor thru-bolts. -
Page 3: Rear Guard
2. HARMONICS FILTER (36 IN. [914 MM] FANS) Select regions only. Install if included with your fan. Flange Nut 3. REAR GUARD Align Mounting Slots Secure Guard 2.5 ft·lb (3.4 N·m) -
Page 4: Blade Assembly
4. BLADE ASSEMBLY Ensure blade assembly is fully seated onto shoulder of shaft and set screws are aligned to fl ats of shaft. 5/32" (4 mm) 20 ft·lb (27.1 N·m) Install if included. -
Page 5: Front Guard
5. FRONT GUARD If installing AirEye with Ion Technology, refer to the instructions that came with the ion generator before installing the front guard. Align Eyelets Fasten Hinge Pins Start with topmost hinge. -
Page 6: Safety Cable
6. SAFETY CABLE Do not attach safety cable to fan mount under any circumstances. 7. HARMONICS FILTER (20, 24, AND 30 IN. [508, 610, AND 762 MM] FANS) Select regions only. Install if included with your fan. - Page 7 ELECTRICAL CONNECTIONS: FAN ONLY Controller or Automation and Multi-Fan Kit Power Cord ELECTRICAL CONNECTIONS: FAN WITH OCCUPANCY SENSOR Occupancy Sensor Controller or Automation and Multi-Fan Kit Power Cord...
- Page 8 ELECTRICAL CONNECTIONS: FAN WITH HARMONICS FILTER 20, 24, and 30 in. (508, 610, and 762 mm) 36 in. (914 mm) Fans Fans Harmonics Filter Harmonics Filter Power Cord Power Cord Controller or Automation Controller or Automation and Multi-Fan Kit and Multi-Fan Kit ELECTRICAL CONNECTIONS: FAN WITH OCCUPANCY SENSOR AND HARMONICS FILTER 20, 24, and 30 in.