Changing The Bulb - Hoover HOE3061IN/E User Instructions

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

CHANGING THE BULB

1. Disconnect the oven from the mains supply.
2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type.
3. Once the defective bulb is replaced, replace the glass cover.
5. Troubleshooting
5.1 FAQ
PROBLEM
The oven does not heat up
The oven does not heat up
No reaction of the touch
user interface
POSSIBLE CAUSE
The clock is not set
A cooking function and
temperature has not been set
Steam and condensation on
the user interface panel
EN 15
SOLUTION
Set the clock
Ensure that the necessary
settings are correct
Clean with a microfiber
cloth the user interface
panel to remove the
condensation layer

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Hot3061bi/eHot3061wi/eHot3051bi/eHot3051wi/e33703225

Table of Contents