Midea MAP12S1TBL User Manual page 35

Important Safety Instructions of Power Supply Cord
WARNING
To reduce the risk of the fire, electric shock, or injury to persons,
!
read the Important Safety Instructions of Power Supply Cord
before operating this appliance.
The power supply cord with this air conditioner contains a current
NOTE
!
detection device designed to reduce the risk of fire. Please refer to
the following section "Operation of Current Device" for details.
The power supply cord contains a current device that senses damage to
the power cord. To test your power supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press
the TEST button. You will notice a click as the RESET button pops out.
3. Press the RESET button. Again you will notice a click as the button
engages.
4. The power supply cord is now supplying electricity to the unit. (On
some products this is also indicated by a light on the head).
NOTES:
Do not use this device to turn the unit on or off.
Always make sure the RESET button is pushed in for correct operation.
Press the RESET button when the Plug Current Device tripped and the
air conditioner does not operate.
The power supply cord must be replaced if it fails to reset when either
the TEST button is pushed, or it cannot be reset. A new one can be
obtained from the product manufacturer.
If power supply cord is damaged, it CANNOT be repaired. It MUST be
replaced by one obtained from the product manufacturer.
WARNING
Avoid fire hazard or electric shock. Do not use an extension
!
cord or an adaptor plug. Do not remove any prong from the
power cord.
Operation of Current Device
!