Table of Contents
Advertisement
4.1 INSPECTION
Before Starting
1. Road safety instructions: the beginning of manual
2.
Clean the compacts, removing dirt and dust. Particularly, the bottom of the plate, engine cooling air inlet,
carburetor and air cleaner.
3. Check the air filter for dirt and dust. If the air filter is dirty, blow through the air filter cartridge
from the inside, moving a jet of dry compressed air up and down until all dust is removed. Otherwise replace
air filer with a new one.
4. Check carburetor for external dirt and dust. Clean with dry compressed air.
5. Check fastening nuts and bolts for tightness. Loosened screws or bolts due to vibration, could lead to
unexpected accident.
Engine Oil Check
1. To check the engine oil level, place the plate compactor on secure level ground with the engine stopped.
2. Remove the filter cap / dipstick from the engine oil filter hole (Figure 3) and wipe it clean.
Figure 3. Engine Oil Dipstick
10
Advertisement
Table of Contents
