Craftsman 580.752011 Operator's Manual
  1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Pressure Washer
  5. 580.752011
  6. Operator's manual
Craftsman 580.752011 Operator's Manual

Craftsman 580.752011 Operator's Manual

Hide thumbs Also See for 580.752011:
Table of Contents

Advertisement

Quick Links

Download this manual
Operator's Manual
PRESSURE WASHER
4.0 HORSEPOWER
2150 PSI
1.9 GPM
Model No. 580.752011
PRESSURE WASHER
CUSTOMER HELPLINE
1 - 8 0 0 - 2 2 2 - 3 1 3 6
HOURS: Mon. - Fri. 8 a.m. to 5 p.m. (CT)
WARNING
Before using this product, read this
manual and follow all Safety Rules
and Operating Instructions.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Visit our Craftsman website: www.craftsman.com
Part No. 197191GS Draft 2 (12/07/2005)
ADVERTENCIA
Antes de utilizar el producto, lea este
manual y siga todas las Reglas de
Seguridad e Instrucciones de Uso.
• Safety
• Assembly
• Operation
• Maintenance
• Parts
• Español

Advertisement

Table of Contents
loading

Related Manuals for Craftsman 580.752011

Summary of Contents for Craftsman 580.752011

  • Page 1 Safety Rules manual y siga todas las Reglas de • Español and Operating Instructions. Seguridad e Instrucciones de Uso. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman website: www.craftsman.com Part No. 197191GS Draft 2 (12/07/2005)

  • Page 2: Table Of Contents

    LIMITED WARRANTY ON CRAFTSMAN PRESSURE WASHER For one year from the date of purchase, when this Craftsman pressure washer is maintained and operated according to the instructions in the operator’s manual, Sears will repair, free of charge, any defect in material and workmanship.
  • Page 3 WARNING WARNING The engine exhaust from this product contains Fuel and its vapors are extremely flammable chemicals known to the State of California to cause and explosive. cancer, birth defects, or other reproductive harm. Fire or explosion can cause severe burns or death.
  • Page 4 WARNING WARNING Running engines produce heat. High pressure spray can cause paint chips Temperature of muffler and nearby areas or other particles to become airborne. can reach or exceed 150°F (65°C). Severe burns can occur on contact. • Always wear eye protection when using equipment or when Exhaust heat/gases can ignite combustibles, in vicinity of equipment in use.

  • Page 5: Features & Controls

    FEATURES AND CONTROLS KNOW YOUR PRESSURE WASHER Read the Operator’s Manual and safety rules before operating your pressure washer. Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. Recoil Starter Air Cleaner Throttle Control...

  • Page 6: Assembly

    WASHER 2. Clean area around fuel fill cap, remove cap. Your Craftsman pressure washer was mostly assembled 3. Slowly add regular unleaded fuel to fuel tank. Be at the factory. However, you will need to perform these careful not to overfill.
  • Page 7 CAUTION! 4. Run water through garden hose for 30 seconds to Alcohol-blended fuels (called gasohol, ethanol or methanol) can attract moisture, which leads flush it of debris. Turn off water. to separation and formation of acids during storage. IMPORTANT: DO NOT siphon standing water for the Acidic gas can damage the fuel system of an engine water supply.

  • Page 8: Operation

    OPERATION HOW TO USE YOUR PRESSURE To Start Your Pressure Washer WASHER To start your engine-powered pressure washer for the first time, follow these instructions step-by-step. This If you have any problems operating your pressure starting information also applies whenever you start washer, please call the pressure washer helpline at the engine after you have let the pressure washer sit 1-800-222-3136.
  • Page 9 10. Move throttle lever to “Fast” position, shown here 14. Return starter grip handle slowly. DO NOT let rope “snap back” against starter. as a rabbit. WARNING Stop Fast Rapid retraction of starter cord (kickback) will pull hand and arm toward engine faster than you can let go.
  • Page 10 How to Stop Your Pressure Washer 2. Pull back collar on quick–connect and pull current spray tip off. Store spray tips in holder provided on 1. Let engine idle for two minutes. the nozzle extension. 2. Move throttle lever on engine to “Stop” position. 3.
  • Page 11 IMPORTANT: You must flush the chemical injection 5. Apply a high pressure spray to a small area and system after each use by placing the filter into a then check the surface for damage. If no damage is bucket of clean water, then run the pressure washer in found, you can assume it is okay to continue rinsing.

  • Page 12: Specifications

    SPECIFICATIONS ENGINE TECHNICAL INFORMATION PRODUCT SPECIFICATIONS This is a single cylinder, L-head, air cooled engine. It Pressure Washer Specifications is a low emissions engine. Pressure ....2150 PSI In the State of California, Model Series Flow Rate .

  • Page 13: Maintenance

    MAINTENANCE OWNER’S RESPONSIBILITIES Follow the hourly or calendar intervals, whichever occurs first. More frequent service is required when operating in adverse conditions noted below. MAINTENANCE SCHEDULE FILL IN DATES AS YOU OPERATING INTERVALS COMPLETE REGULAR SERVICE SERVICE DATES Every 25 Every 50 Every 100 Before...
  • Page 14 Pressure washer parts should be kept clean to reduce the 2. Place in-line filter screen into threaded end of risk of overheating and ignition of accumulated debris. nozzle extension. Direction does not matter. Push screen in with eraser end of pencil until it rests flat CAUTION at bottom of opening.
  • Page 15 Pump Maintenance 3. Verify oil is at “Full” mark on dipstick. Replace and tighten dipstick. This model does not require any pump maintenance. The pump is pre-lubricated and sealed, requiring no additional lubrication for the life of the pump. ENGINE MAINTENANCE WARNING Adding Engine Oil Unintentional sparking can result in fire or...
  • Page 16 Service Air Cleaner Service Spark Plug Your engine will not run properly and may be Service the spark plug every 100 hours of operation or damaged if you run it with a dirty air cleaner. yearly, whichever occurs first. 1. Clean area around spark plug. Service the air cleaner once every 25 hours of operation or once each year, whichever comes first.
  • Page 17 Spark Arrester Service • Remove spark arrester screen for cleaning and inspection. Your engine is not factory-equipped with a spark arrester. • Replace if screen is damaged. In some areas, it is illegal to operate an engine without a spark arrester. Check local laws and regulations. A spark Air Cooling System arrester is available from your nearest Sears service Over time debris may accumulate in cylinder cooling...

  • Page 18: Storage

    STORAGE AFTER EACH USE WINTER STORAGE Water should not remain in the unit for long periods of CAUTION time. Sediments or minerals can deposit on pump parts and “freeze” pump action. Follow these You must protect your unit from freezing temperatures. procedures after every use: •...
  • Page 19 LONG TERM STORAGE Protect Pump To protect the pump use Sears pump saver to prevent If you do not plan to use the pressure washer for more freeze damage and lubricate pistons and seals. than 30 days, you must prepare the engine and pump for long term storage.

  • Page 20: Troubleshooting

    TROUBLESHOOTING Problem Cause Correction 1. Low pressure spray tip installed. 1. Replace spray tip with high pressure spray tip. 2. Water inlet is blocked. 2. Clear inlet. 3. Inadequate water supply. 3. Provide adequate water flow. 4. Inlet hose is kinked or leaking. 4.

Table of Contents