Table of Contents
Advertisement
1.
Probe cover box
2.
Display
3.
Mode button
4.
Probe cover ejection button
WALL MOUNTING INSTRUCTIONS
The optional wall mount bracket should be mounted approximately 48 inches
from the floor. This allows the end user of average height relatively easy access
to the probe and probe covers. It should have at least 12 inches of clearance on
the top of the unit so that the end user can easily remove the thermometer probe
and load a probe cover without hindrance. Clearance of at least 4 inches from
the bottom of the unit and from either side is also advisable to prevent tangling
of the probe cord with other equipment at the bedside.
The wall mount bracket should be mounted in a location so that when a
thermometer is installed, the display can be read easily. Placement should
also ensure that the probe can be readily removed from the thermometer, a
probe cover can be easily installed and the probe can be returned to its
position without stress being placed on either the instrument, the wall mount
or most importantly, the patient.
Figure 1
5.
Probe handle
6.
Probe storage channel
7.
Latching probe connector
8.
Battery door
3
Advertisement
Table of Contents
