Sanyo VCC-HD2100P Manual page 62
Hide thumbs
Also See for VCC-HD2100P:
- Service manual (41 pages) ,
- Specifications (2 pages) ,
- User manual (118 pages)
Advertisement
CODEC/STREAMING
Click
Configure the conditions of the video/image transmission.
A
Configuring Aspect Ratio
B
Configuring JPEG images
C
Configuring H.264 video
Required operation privilege: admin, operator
If [SSL] is set to "ON" on the NETWORK SETTINGS screen, you cannot configure H.264 video.
In [ASPECT RATIO], select the aspect ratio (width-to-height ratio) of the video/image by
clicking the corresponding radio button and click
16:9 (Landscape), 4:3 (Portrait)
Clicking
SET
1
Configure the resolution (RESOLUTION).
The available options vary depending on your selection in [ASPECT RATIO].
16:9: 1920×1080, 1280×720, 1024×576, 640×360
4:3: 2288×1712, 1600×1200, 1280×960, 1024×768, 800×600, 640×480, 320×240
2
Configure the image quality (PICTURE QUALITY).
BASIC, NORMAL, ENHANCED, FINE, SUPER FINE
3
Configure the live video frame rate (LIVE FRAME RATE) for each operation privilege and
click
SET
.
The available options vary depending on the model used.
VCC-HD2300/VCC-HD2100: 0.1ips, 0.2ips, 0.5ips, 1ips, 3ips, 5ips, 10ips, 15ips, 30ips
VCC-HD2300P/VCC-HD2100P: 0.1ips, 0.2ips, 0.5ips, 1ips, 2.5ips, 5ips, 8ips, 12.5ips, 25ips
in the configuration menu to display the CODEC/STREAMING SETTINGS screen.
reboots the camera.
.
SET
Working with Administrator Configuration Screens 12/50
Advertisement
