Sanyo VCC-HD2100P Manual page 26

MENU
Click on the control panel to display the administrator configuration menu that includes a series of menu
selection buttons.
If you are a surveillance system administrator, use these buttons to configure necessary settings according to the
installation environment and application of your camera.
Configuration Related to Network Connection
Changing the camera's IP address.
Using SANYO's DDNS service.
Using SSL communication.
Streaming H.264 video in multicast
Clock and Camera Title Configuration
Adjusting clock to specific time based on external input signal
Configuring the camera title
Configuration Related to Access and Security
Changing the user password
Allowing all users to access the camera without any authentication
check
Restricting PCs that have access to the camera
Configuration Related to Live Video
Accessing the camera from video viewer or similar software to view
live video
Hiding specific portions of video
Alarm-Related Configuration
Sending an alarm image via e-mail
Using the alarm input terminals to switch the camera between the
color and black-and-white video modes
(This function is supported only by VCC-HD2300P/VCC-HD2300)
Recording-Related Configuration
Recording images from the camera to an FTP server
Operation
Operation
Operation
Operation
Operation
Operation
Configuration Screen (Menu)
NETWORK SETTINGS
Configuration Screen (Menu)
CLOCK SETTINGS
Configuration Screen (Menu)
USER SETTINGS
SECURITY SETTINGS
Configuration Screen (Menu)
NETWORK SETTINGS
CAMERA SETTINGS (PRIVACY MASK)
Configuration Screen (Menu)
E-MAIL SETTINGS
CAMERA SETTINGS (DAY/NIGHT)
Configuration Screen (Menu)
FTP SETTINGS
Quick Operation Guide 9/10