Table of Contents
Advertisement
Installation and Operation Manual
Desk PDM Charger
Note: It may be necessary to import the parameter definitions file that is included in the
software package. The package is provided by your supplier.
1
Check that the Desk PDM Charger is connected to WinPDM/CPDM3.
2
In WinPDM or in the Device manager in CPDM3, click on the Numbers tab.
3
Select the Desk PDM Charger device that you want to change parameters for.
4
In the Number menu, click "Edit...".
5
Edit the parameters you want to edit.
6
Click "OK".
2.3 SECURITY
(information regarding software security)
N/A
3
COMMISSIONING
Follow these instructions to verify that the charging works.
1
Connect the charger according to chapter
page 6.
2
Place a handset in the charging slot to start charging. The handset indicates the
charging progress, see respective manual for details.
See
figure 2
Follow these instructions to start WinPDM/CPDM3.
In the case of WinPDM:
1
Check that the charger is connected to your pc via USB.
2
Start WinPDM.
Go to the "Devices" tab or the Numbers tab and verify that the Desk PDM
3
Charger is online.
20/1531-ANF 901 43 D 2017-03-22
on page 6 to see the connections to the charger.
2.1 Desk PDM Charger Installation
on
8
Advertisement
Table of Contents
