Table of Contents
Advertisement
Installation and Operation Manual
Desk PDM Charger
If the error occurred during Easy Replacement, remove the handset from the charger.
The charger should return to normal operation.
Software error in charger. Send charger for service.
Charging does not start
Check that the handset is properly inserted in the charger.
Desk PDM Charger does not appear in WinPDM/
Check that the communication cable (USB or Ethernet) is connected.
Easy replacement does not start.
Check that the handset are of the same device type.
Check the handset software version. See the corresponding Configuration Manual for
the handset.
Check that the Desk PDM software version is 1.3.x or greater, see
on page 10
7
RELATED DOCUMENTS
Installation and Operation Manual Portable Device
Manager (PDM), Windows version
Installation and Operation Manual CPDM3
User Manual, Mitel DT4x3 DECT Cordless Phones
User Manual, Mitel DT390 DECT Cordless Phone
User Manual, MItel DT69x DECT Cordless Phones
20/1531-ANF 901 43 D 2017-03-22
CPDM3
4.2 Software Update
12/1531-ANF 901 43
25/1531-ANF 901 43
1424-EN/LZT 103 089
1424-EN/LZT 103 087
1424-EN/LZT 103 088
12
Advertisement
Table of Contents
