Introduction - Mitel Desk PDM Charger Installation And Operation Manual

Installation and Operation Manual
Desk PDM Charger

INTRODUCTION

1
This document describes how to install, configure and operate the Desk PDM charger.
The Desk PDM Charger is an advanced charger equipped with a USB port, making it
possible to connect it directly to a PC for the purpose of upgrading or configuring the
Desk PDM Charger itself or a handset placed in the charger. The Desk PDM Charger
also has two Ethernet ports, enabling upgrading and configuring over a LAN of a
portable placed in the charger.
The USB port is used when the Desk PDM Charger is connected to a PC running the
Portable Device Manager (WinPDM), Windows Version. The WinPDM or the CPDM3
can be used to upgrade the software and to configure parameters in the Desk PDM
Charger as well as in a handset placed in the Desk PDM Charger.
The Desk PDM Charger supports easy replacement, that is replacement of a faulty
handset via the handset display and does not involve WinPDM or CPDM3.
Note: There are different Desk PDM Charger available:
• Art. No: Desk PDM Charger-BML 35106X/X; advanced desktop charger for DT390/
DT69x telephones (Although not originally designed for the Mitel 5613 and 5614,
this PDM Charger is compatible for programming these two phone models).
• Art. No: Desk PDM Charger-87L0000XAAA; advanced desktop charger for DT4x3
telephones.
Desk PDM Charger for DT390/DT69x
Figure 1. Desk PDM Chargers.
The Ethernet ports makes it possible to connect several Desk PDM Charger's to the
same LAN.
This document is intended as a guide for installation, maintenance, operation and
troubleshooting purposes.
Supply voltage
Max current consumption
when charging
20/1531-ANF 901 43 D 2017-03-22
Figure 1.
DESK PDM CHARGER
5 V DC
2.0 A
Desk PDM Charger for DT4x3
DESKTOP CHARGER
ADAPTER
100 - 240 V AC, (50-60Hz)
0.4 A
4