Samsung AM MXVAFC Series Installation Manual page 24

Preparing for installation
Moving the outdoor unit
f Select the moving path in advance . f
f Be sure that moving path can support weight of the outdoor unit . f
f Do not slant the product more than 30˚ when carrying it . (Do not lay the product down in sideways . ) f
f Surface of the heat exchanger is sharp . Be careful not to get injured while moving the product . f
• You must use certain part of the product when moving the product .
CAUTION
When moving with a crane
f Fasten the wire rope as shown in the figure . f
f To protect damage or scratches, insert a piece of cloth between the f
outdoor unit and the wire rope .
When moving with a forklift
f Carefully insert the forklift forks into the forklift holes at the bottom of
f
the outdoor unit .
f Be careful with the forklift from damaging the product .
f
When moving the product without wooden pallet and the crane is not available for use
f Connect a wire rope to the outdoor unit as you would move it with a f
crane .
f Hang the wire rope to the forklift fork to move the outdoor unit . f
24
Wire rope
Holes for wire rope to go
through
Forklift
Holes for forklift forks
to go through
Forklift
Forklift holes
Wire rope