Main Menu Controls - Optiquest Q2161wb User Manual

Main Menu Controls

Adjust the menu items shown below by using the up
Control
Auto Setup
Brightness
Contrast
Management
H. Position
V. Position
Customer Scaling
Clock
Clock/Phase
Phase
Cool
Neutral
Color
sRGB
Custom Color
H. Position
OSD Display
V. Position
Factory Recall
English
Français
Language Deutsch
Italiano
Español
Exit
Optiquest Q2161wb
Explanation
Automatically sizes, centers, and fine tunes the
video signal to eliminate waviness and
distortion.
NOTE: Auto Image Adjust works with most
common video cards. If this function does not
work on your LCD display, then lower the video
refresh rate to 60 Hz and set the resolution to its
pre-set value.
Adjusts background black level of the screen
image.
Adjusts the difference between the image
background (black level) and the foreground
(white level).
Moves the screen image left or right and up or
down.
Fill to Screen Adjusts the video input signal to the screen size
other than 1680 x 1050 using the following
Fill to Aspect Ratio
options.
Adjusts the width of the screen image.
Sharpens the focus by aligning text and/or
graphics with pixel boundaries.
Provides several color adjustment modes.
Allows the user to move the OSD menus and
control screens.
Returns the adjustments back to factory settings
if the display is operating in a factory Preset
Timing Mode listed in the Specifications of this
manual.
Allows the user to choose the language used in
the menus and control screens.
Exits the control screen and saves adjustments.
and down buttons.
10