Related Manuals for Optiquest Q22wb-1
Summary of Contents for Optiquest Q22wb-1
-
Page 1: Lcd Display
Q22wb LCD Display - User Guide - Guide de l'utilisateur - Bedienungsanleitung - Guida dell'utente - Pyководство пользователя - Gebruikshandleiding Model No. : VS11725... -
Page 2: Table Of Contents
Contents TCO Information ... i Compliance Information... 1 Important Safety Instructions... 2 Declaration of RoHS Compliance... 3 Copyright Information ... 4 Product Registration ... 4 Getting Started Package Contents ... 5 Precautions ... 5 Quick Installation ... 6 How to use the stand... 7 Wall Mounting (Optional) ... -
Page 3: Tco Information
TCO Information Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. -
Page 4: Compliance Information
Compliance Information For U.S.A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. -
Page 5: Important Safety Instructions
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. -
Page 6: Declaration Of Rohs Compliance
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance... -
Page 7: Copyright Information
® NERGY Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. -
Page 8: Getting Started
NOTE: The CD includes the User Guide PDF files and INF/ICM display optimization files. The INF file ensures compatibility with Windows operating systems, and the ICM file (Image Color Matching) ensures accurate on-screen colors. ViewSonic recommends that you install both the INF and ICM files. -
Page 9: Quick Installation
NOTE: Windows users may receive a message asking them to install the INF file. This is on the CD. 4. Insert the ViewSonic Wizard CD into the computer’s CD drive. Follow the on-screen instructions. If your computer does not have a CD-ROM drive, please refer to Customer Support page. -
Page 10: How To Use The Stand
HOW TO USE THE STAND The monitor is shipped with the stand detached. Be sure to attach the stand before operating the display and remove if it is necessary to re-box. Install the Stand on a stable surface. The monitor may cause injury or damage if it falls CAUTION ... -
Page 11: Wall Mounting (Optional)
Wall Mounting (Optional) To obtain a wall-mounting kit, contact ViewSonic instructions that come with the base mounting kit. To convert your LCD display from a desk- mounted to a wall-mounted display, do the following: Screw holes Optiquest Q22wb or your local dealer. Refer to the ®... -
Page 12: Using The Lcd Display
Using the LCD Display Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1680 x 1050) and refresh rate (or vertical frequency; example 60 Hz). After setting the timing mode, use the OSD (On-screen Display) controls to adjust the screen image. -
Page 13: Controls And Connectors
CONTROLS AND CONNECTORS ENTER AUTO EXIT <Front> Auto Button (AUTO) Exit / Volume Button (EXIT) Scroll Down / Contrast Button ( Scroll Up / Brightness Button ( Menu / Select Button (ENTER) Power Switch ( Power Indicator NOTE Green: Normal operation Orange: Power Management T he monitor enters into power management mode which reduces the power consumption to less than 2W when receiving no horizontal and/or vertical sync signal. -
Page 14: Operating The Monitor
OPERATING THE MONITOR Press the ENTER Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the Select the Menu item which contains the adjustment icon relating to the adjustment you want to make. -
Page 15: Adjustment Menu Contents
ADJUSTMENT MENU CONTENTS Auto Adjust Adjustment Item Auto Adjust * Direct * For best results, use the Auto Adjust in conjunction with the adjustment pattern. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. - Page 16 Geometry Only Analog Input Adjustment Item H. Position V. Position Pixel Clock Phase Color Adjustment Item 9300K 7500K 6500K User Preset Adjustment Item H.Position V.Position OSD Time Optiquest Q22wb Problem / Option Button to Press Too left Too right Too low Too high Too narrow Too wide To correct flickering text or lines Problem / Option Button to Press Bluish white Yellowish white Reddish white Too weak Green Too strong Blue Problem / Option Button to Press OSD is too left OSD is too right OSD is too low...
- Page 17 Language Adjustment Item Language Recall Adjustment Item Recall All Miscellaneous Adjustment Item Sharpness DDC/CI NOTE DDC/CI On and Off are switched as follows by pressing the On Off Display Information Optiquest Q22wb Problem / Option Button to Press English English Español Nederlands Dutch Français French Deutsch German Italiano Italian 簡體中文 Русско Russian 繁體中文 Problem / Option Button to Press Factory-preset data is restored. Return to Menu. Problem / Option Button to Press 1 2 3 4 5 You can change the picture quality from 1 to 5 (sharp to soft). Press the Button to change the picture quality in numerical order. Press the Button to change the picture quality in reverse numerical order.
-
Page 18: Input Select
Input Select Adjustment Item Input Select NOTE When only one of the two signal inputs is connected to the signal source, the one connected NOTE is automatically selected. Input Select function is not available if there is no signal input from the selected connector or during the power management mode. Optiquest Q22wb Problem / Option Button to Press D-sub Select the Analog input. Select the Digital input. -
Page 19: Other Information
Preset Timing Mode (pre-adjusted to VESA Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in permanent damage to the LCD display. Macintosh computers older than G3 require a ViewSonic ViewSonic. Optiquest Q22wb 22”... -
Page 20: Troubleshooting
Loose or broken pins in the cable connector could cause an improper connection. • Connect the LCD display to another computer. • If you have an older graphics card, contact ViewSonic Control buttons do not work • Press only one button at a time. -
Page 21: Customer Support
United States www.viewsonic.com Canada www.viewsonic.com Latin America www.viewsonic.com (Mexico/Chile) United Kingdom www.viewsoniceurope.com/uk Europe, Middle East, Baltic countries, and www.viewsoniceurope.com North Africa Australia/New Zealand www.viewsonic.com.au Singapore/Malaysia/ www.ap.viewsonic.com Thailand South Africa and www.ap.viewsonic.com other countries India www.in.viewsonic.com Hong Kong www.hk.viewsonic.com Macau www.hk.viewsonic.com Korea www.kr.viewsonic.com... -
Page 22: Cleaning The Lcd Display
LCD display screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD display. • ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol- based cleaners. Optiquest... -
Page 23: Limited Warranty
How long the warranty is effective: ViewSonic LCD displays are warranted for 1 year for all parts including the light source and 1 year for all labor from the date of the first consumer purchase.