Table of Contents
Advertisement
STEP 1. FITTING THE DISHWASHER IN PLACE
6.
Adjust the height of the dishwasher by turning the
steel feet with your hands. Leave enough space to
adjust them later.
7.
Screw in the back foot completely by turning the
adjustment screw at the front counterclockwise. Use
a flat-bladed screwdriver or a 1/4˝ nut driver. (Only
models with front adjustable rear foot).
If the machine does not have a front adjustable rear
foot, level the remaining rear legs just as you did
the front legs.
8.
Push the dishwasher into the cabinet. At the same
time, pull the power cord, the drain hose, and the
fill hose through the appropriate cut outs. Be careful
when pushing the dishwasher into place. The feet
could still damage certain types of flooring even with
the plastic foot covers in place.
NOTE:
If installing in a metal cabinet, the hole(s) for the
drain hose and connection pipe must be fitted with
edge protectors/rubber grommets.
9.
Lift the dishwasher a little at the front and turn the
front feet to lower them.
Page 8
Customer Care Center
1-800-898-1879
www.askousa.com
Advertisement
Table of Contents
