Step 7. Attaching The Toe Kick (If Applicable) - Asko D5894XXLFI Installation Instructions Manual

STEP 7. ATTACHING THE TOE KICK (IF APPLICABLE)

TYPE A
TYPE A
The toe kick is attached with two screws that can
only be adjusted vertically.
TYPE B
1. Attach the supplied sound insulation material to
the back of the toe kick. (Only for certain models.)
2. Loosen the holders for the toe kick by moving the
gray catches to the side.
3. Adjust the holders (pull out or push in) until they
are on a level with the surrounding kitchen toe kick
space.
4. Lock the holders in place by pushing each catch
into a suitable notch in the holder.
Page 17
TYPE B
3
Customer Care Center
1-800-898-1879
www.askousa.com
2