Table of Contents
Advertisement
STEP 5. CHECKING DISHWASHER FUNCTION AND FIT
Test the dishwasher with the Rinse & Hold program.
Check that the dishwasher fills and drains properly.
Also check that none of the connections leak.
Also check that adjacent drawers and cabinet doors
can be opened when the dishwasher door is open.
STEP 6. SECURING THE DISHWASHER
1.
Pull out the upper basket, and the center basket
if present, and turn the basket stop on the runner
outward.
2.
To make more space available when installing the
machine, remove the upper and center basket if
present.
3.
Remove the lower basket. Otherwise it easily rolls
out if you need to adjust the dishwasher during
installation.
4.
Screw the dishwasher to the counter from the inside
or to the cabinets on either side. If the counter is a
hard material, such as marble, screw the dishwasher
to the side cabinets. Use the supplied plastic
spacers when mounting the dishwasher into place!
NOTE:
When it is not possible to attach the dishwasher to
the cabinet or the underside of the counter top, you
should install tip guards to prevent the machine from
tipping when you open the door. Sold individually.
Tip Guards
(P/N 8070851)
5.
Cover the screw holes on the sides with the supplied
plastic plugs. Push in the plugs diagonally to fit them
in place.
Page 15
Alt. 1
6
Customer Care Center
1-800-898-1879
www.askousa.com
Alt. 2
7
6
7
Advertisement
Table of Contents
