Vega Absolute Vega SI-13 User Manual page 20

Join accept delay 1 (not displayed in the "Simple" mode) – sets the time that the device
will open the first receiving window to receive confirmation for the join request from the
LoRaWAN network. The second window always opens after 1 second after the first.
Uplink number of transmission (not displayed in the "Simple" mode) – if the
"Confirmed uplinks" function is disabled, the device will simply send each packet as many
times as specified in this setting. If "Confirmed uplinks" is enabled, the device will send packets
until it receives a confirmation or until it sends as many packets as specified in this setting.
20
Vega SI-13 / User Manual
Revision 13 - 23 September
2020