Initial Startup - Vega Absolute Vega SI-13 User Manual

Vega SI-13 / User Manual

INITIAL STARTUP

Vega SI-13 supports two activation methods in the LoRaWAN network - ABP and OTAA.
Select one of the methods using "Vega LoRaWAN Configurator" application (See part 4).
1. ABP. After pressing the start button, the device immediately starts working in the
"Active" mode.
2. OTAA. After pressing the start button, the device makes three attempts to connect to
the network within the set frequency band. After the activation in the LoRaWAN network is
confirmed, the device sends a signal (LED flashing for 3 seconds) and switches to the "Active"
mode. If all attempts fail, the modem switches to the "Storage" mode.
Hold the start button pressed (min. 5 seconds) to switch the device from the "Active"
mode back to the "Storage" mode.
When switching to the "Storage" mode, all readings from the pulse inputs
accumulated in the device memory are reset
Revision 13 - 23 September
2020
11