Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vega Absolute Vega SI-13
Summary of Contents for Vega Absolute Vega SI-13
- Page 1 LoRaWAN Device VEGA SI-13 User manual www.vega-absolute.ru...
- Page 2 Vega SI-13 / User Manual Document Information Title LoRaWAN Device Vega SI-13 Document type Manual – Translation from Russian Document number V02-SI13-01 Revision and date 13 - 23 September 2020 This document applies to the following products: Product line Product name...
-
Page 3: Table Of Contents
“LoRaWAN settings” tab ................................. 18 “Vega SI-13” tab ..................................22 5 COMMUNICATION PROTOCOL ............................25 Vega SI-13 modem transmits the following types of packets ..................25 VEGA SI-13 modem receives packets of the following types ..................27 6 STORAGE AND TRANSPORTATION REQUIREMENTS ...................... 29 7 CONTENT OF THE PACKAGE .............................. -
Page 4: Introduction
Vega SI-13 / User Manual INTRODUCTION This manual is designated for Vega SI-13-232 and Vega SI-13-485 modems (hereinafter – the modem) manufactured by Vega-Absolute OOO and provides information on powering and activation procedure, control commands and functions of the modem. -
Page 5: Description And Operation
LoRaWAN protocol to the gateway through wireless communication within 860-1000 MHz frequency band. In addition, Vega SI-13 can be used as a security device - all inputs can be configured as security inputs. - Page 6 Vega SI-13 / User Manual o DevEUI; o Month and year of manufacture; o QR-code containing DevEUI for automatized count. Sticker located in three places – on device case, in factory certificate and on the packing box. Besides, there is an additional sticker located on the packing box and contains: o Information about firmware version;...
-
Page 7: Specification
Vega SI-13 / User Manual 2 SPECIFICATION Main Double-contact digital inputs up to 2 Maximum input frequency 200 Hz Security inputs up to 2 Interface RS-232 or RS-485 USB-port Operating temperatures -40…+85 °С Built-in temperature sensor LoRaWAN LoRaWAN class Quantity of LoRaWAN channels... -
Page 8: Operation
Vega SI-13 / User Manual 3 OPERATION CONTACTS When connecting a modem to external devices, consider the internal circuitry of its pulse inputs shown below. The modem has 10 contacts, see table below: Contact Description Power - Power + RS-485 B... - Page 9 Vega SI-13 / User Manual Equipment with NAMUR pulse output is not supported Any input can be configured for work in the "Security" mode with special software when connected to the modem via USB. In this case, the device does not count pulses at the "Security"...
-
Page 10: Indication
Vega SI-13 / User Manual INDICATION There is one red LED on the terminal board. The indication is only used when the device is activated in the LoRaWAN network. Meaning LED signal Linking to the network Series of short flashings... -
Page 11: Initial Startup
Vega SI-13 / User Manual INITIAL STARTUP Vega SI-13 supports two activation methods in the LoRaWAN network - ABP and OTAA. Select one of the methods using “Vega LoRaWAN Configurator” application (See part 4). 1. ABP. After pressing the start button, the device immediately starts working in the "Active"... -
Page 12: Transparent Mode Operation
INDEPENDENT POOLING MODE Vega SI-13 can operate in the mode of an independent pooling of any connected through RS interface devices. You need to create and set up the required commands and suspected responses in the «Vega LoRaWAN Configurator»... -
Page 13: Connecting Via Usb
Vega SI-13 / User Manual CONNECTING VIA USB The modem can be adjusted with the "Vega LoRaWAN Configurator" application (See part 4). Before connecting the device to the computer for the first time, you must install the driver for the COM port stsw-stm32102, which can be downloaded from iotvega.com. After running the executable file VCP_V1.4.0_Setup.exe, the installer window will appear:... -
Page 14: Vega Lorawan Configurator
Vega SI-13 / User Manual 4 VEGA LORAWAN CONFIGURATOR The "Vega LoRaWAN Configurator" application (hereinafter referred to as the configurator) is intended for setting up the device via USB. The configurator has two modes of operation - "Simple" and "Expert". In the "Simple"... -
Page 15: Connection To The Device
Vega SI-13 / User Manual The buttons "Export settings" and "Import settings" allow you to save a set of settings to a file and then load them from a file. The buttons "Get settings" and "Apply settings" are needed to display the current device settings in the program and to save the changed settings in the device memory, respectively. -
Page 16: Device Info" Tab
Vega SI-13 / User Manual To read the settings from the device, you need to click the "Get settings" button, until this point the application will display the default settings or from the last connected device. After making the necessary changes to the settings, you should click the "Apply settings"... - Page 17 Vega SI-13 / User Manual Join network button - launch the LoRaWAN network connection procedure with the previously selected ABP or OTAA method. If the device is already connected to the network, reconnection procedure will occur. Link check (not displayed in the "Simple" mode) - when pressed, the device sends a special signal to the LoRaWAN network, in response to which the network informs it of the number of gateways that received this signal and the signal quality.
-
Page 18: Lorawan Settings" Tab
Vega SI-13 / User Manual “LORAWAN SETTINGS” TAB The "LoRaWAN Settings" tab allows you to configure various parameters of the LoRa network. Region - allows you to select one of installed frequency plans or specify a custom frequency plan. Custom frequency plan is EU-868 based. - Page 19 Vega SI-13 / User Manual This frequency band allows you to set up to 16 channels, as well as the frequency and speed of the second receiving window. The first three channels and the second receiving window parameters are mandatory. Without these parameters the custom frequency band will be considered empty Activation type –...
- Page 20 Vega SI-13 / User Manual Join accept delay 1 (not displayed in the "Simple" mode) – sets the time that the device will open the first receiving window to receive confirmation for the join request from the LoRaWAN network. The second window always opens after 1 second after the first.
- Page 21 Vega SI-13 / User Manual TX power (not displayed in the "Simple" mode) – the device RF transmitter power is adjusted to this value when sending packets to the LoRaWAN network. This option can be changed by the network server.
-
Page 22: Vega Si-13" Tab
Vega SI-13 / User Manual “VEGA SI-13” TAB The “Vega SI-13” tab contains the settings of the connected device. Current state – displays the current parameters of the device - the number of counted pulses at the inputs and the temperature. - Page 23 Vega SI-13 / User Manual this input is closed. The maximum possible frequency of sending alarm packets is one per 10 seconds. Guard settings – allows setting up the work of security inputs, namely, what kind of security input state changing is reason to send an alarm message: short, open, or both.
- Page 24 Vega SI-13 / User Manual Pattern – pattern that will be compared byte-by-byte with the result of masking the response of the connected device. Action – what type of packet to send to the server if the received data matches the set pattern.
-
Page 25: Communication Protocol
LoRaWAN port 2 for uplink and downlink messages. In fields consisting of several bytes, the little-endian byte order is used VEGA SI-13 MODEM TRANSMITS THE FOLLOWING TYPES OF PACKETS 1. Packet with current readings, sent regularly Size in bytes... - Page 26 Vega SI-13 / User Manual 3. Packet with time correction request, sent every seven days on LoRaWAN port 4 Size in bytes Field description Data type 1 byte Packet type, this packet == 255 uint8 4 bytes Time of the modem at a moment of the packet transmission...
-
Page 27: Vega Si-13 Modem Receives Packets Of The Following Types
Vega SI-13 / User Manual VEGA SI-13 MODEM RECEIVES PACKETS OF THE FOLLOWING TYPES 1. Real-time clock adjustment – send by application on LoRaWAN port 4 Size in bytes Field description Data type 1 byte Packet type, this packet = 255... - Page 28 Vega SI-13 / User Manual 3 – 12 hours 4 – 24 hours 5 – 5 minutes 6 – 15 minutes 7 – 30 minutes Interface speed 1 byte 1 – 4800 2 – 9600 3 – 14400 4 – 19200 5 –...
-
Page 29: Storage And Transportation Requirements
Vega SI-13 / User Manual 6 STORAGE AND TRANSPORTATION REQUIREMENTS Vega SI-13 modem shall be stored in the original packaging in heated room at temperatures +5°С to +40°С and relative humidity less than 85%. The modem shall be transported in covered freight compartments of all types at any distance at temperatures -40°C to +85°C. -
Page 30: Content Of The Package
Vega SI-13 / User Manual 7 CONTENT OF THE PACKAGE The modem is delivered complete with: 1. Vega SI-13-232 modem – 1 pc. Screw – 4 pcs. Factory certificate – 1 pc. 2. Vega SI-13-485 modem – 1 pc. Screw – 4 pcs. -
Page 31: Warranty
Vega SI-13 / User Manual 8 WARRANTY The warranty period for the device is 5 years from the date of sale. The manufacturer is obligated to provide repair services or replace the failed device during the entire warranty period. The consumer undertakes to comply with the terms and conditions of transportation, storage and operation specified in this user manual. - Page 32 Vega SI-13 / User Manual vega-absolute.ru User Manual © Vega-Absolute OOO 2017-2020 2020 Revision 13 - 23 September...