Connection To The Device - Vega Absolute Vega SI-13 User Manual

Vega SI-13 / User Manual
The buttons "Export settings" and "Import settings" allow you to save a set of settings to
a file and then load them from a file.
The buttons "Get settings" and "Apply settings" are needed to display the current device
settings in the program and to save the changed settings in the device memory, respectively.
The application window contains three tabs – Device info, LoRaWAN settings and
device settings.
The language selection menu is in the upper right corner.

CONNECTION TO THE DEVICE

For the connection to the device, perform the following steps:
1. Connect the USB cable to the device.
2. Start the "Vega LoRaWAN Configurator" application.
3. Click the "Connect" button in the menu on the left.
The application automatically recognizes the type of device, and the device selection
menu becomes inactive.
Revision 13 - 23 September
2020
15