EHT Module
To avoid DANGER TO LIFE, do not attempt to service the chassis until all precautions
necessary for working on HIGH VOLTAGE equipment have been observed. In order to
prevent damage to solid state devices, do not arc pix tube anode lead to chassis or
ADJUSTMENT PROCEDURE
HIGH VOLTAGE WARNING
earth ground.
Warning: The power must be OFF before removing any connector from
circuit board or unit. Failure to do so may result in severe damage to the
projection unit.
Warning: read carefully all safety instructions, mentionned in the user's
manual of the precision high voltage probe
R762716
Date: 10/02/98 R762716