Advertisement
installing the edge Guide
Use the Edge Guide to make cuts parallel
to the edge of a workpiece, or following a
guide clamped onto the workpiece.
1. Loosen Edge Guide Knob, then install Edge
Guide with Fence facing inward and down.
2. Tighten Edge Guide Knob securely.
3. Loosen Fence Knob, adjust
Fence, then tighten Knob.
Setting up a temporary Guide
Clamp a temporary guide to the workpiece to make a
straight cut which is not parallel to edge of workpiece.
1. Clamp a suitable straight board across
workpiece parallel to desired location of cut.
2. Loosen Edge Guide Knob, then install Edge
Guide with Fence facing outward and up.
3. Tighten Edge Guide Knob securely.
4. Measure proper distance from bit to Fence.
5. Loosen Fence Knob, adjust
Fence, then tighten Knob.
Item 58253
For technical questions, please call 1-888-866-5797.
edge Guide
Fence
Fence
Knob
edge Guide
Knob
edge
Guide
Fence
Knob
Fence
Knob
Page 9
Advertisement
