Advertisement
circle cutting
Use the center hole in the Fence as a
pivot point when cutting circles.
1. Install Fence according to Setting
up a Temporary Guide.
2. Loosen Fence Knob, set distance from center hole
in Fence to far edge of bit, equal to radius of circle.
3. Tighten Fence Knob.
4. Align center hole in Fence with center point of circle.
5. Drive a nail through center hole
to secure Fence in place.
Workpiece and Work area Set up
1. Designate a work area that is clean and well lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. There must not be objects, such as utility lines,
nearby that will present a hazard while working.
Page 10
For technical questions, please call 1-888-866-5797.
edge Guide
edge
Guide
Fence
3. Route the power cord along a safe route to reach
the work area without creating a tripping hazard or
exposing the power cord to possible damage. The
power cord must reach the work area with enough
extra length to allow free movement while working.
4. Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working.
Knob
center
Hole
Fence
Knob
Item 58253
Advertisement
