Download
Share
Print this page
Bauer 19121E-B Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Bauer Manuals
  4. Wood Router
  5. 19121E-B
  6. Owner's manual & safety instructions

Bauer 19121E-B Owner's Manual & Safety Instructions

Variable speed compact router
Hide thumbs Also See for 19121E-B:

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21i

Advertisement

loading

Related Manuals for Bauer 19121E-B

Summary of Contents for Bauer 19121E-B

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    Table of Contents Safety ................2 Maintenance .............12 Specifications ............7 Parts List and Diagram ..........14 Setup .................7 Warranty ..............16 Operation ..............8 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

  • Page 3: Safety

    2. Electrical safety f. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing a. Power tool plugs must match the outlet. and gloves away from moving parts. Never modify the plug in any way. Do not use Loose clothes, jewelry or long hair any adapter plugs with earthed (grounded) can be caught in moving parts.
  • Page 4 q. The warnings, precautions, and instructions b. Maintain labels and nameplates on the tool. discussed in this instruction manual cannot These carry important safety information. cover all possible conditions and situations If unreadable or missing, contact that may occur. It must be understood by the Harbor Freight Tools for a replacement.
  • Page 5 Grounding TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug.
  • Page 6 Extension Cords 1. Grounded tools require a three wire extension cord. 7. Make sure the extension cord is properly wired Double Insulated tools can use either and in good electrical condition. Always replace a two or three wire extension cord. a damaged extension cord or have it repaired by a qualified electrician before using it.

  • Page 7: Specifications

    Specifications Electrical Rating 120VAC / 60Hz / 6.5A Load Speed 10,000–30,000/min Collet Size 1/4" Max. Accessory Diameter 1-3/8″ Setup - Before Use: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 14.

  • Page 8: Operation

    Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Power Switch is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.
  • Page 9 Installing the Fence Use the Fence to make cuts parallel to the edge of a workpiece, or following a guide clamped onto the workpiece. 1. Install the Fence Bracket with the Fence facing inward, and the flanges down. Attachment 2. Using the Attachment Knob, attach Knob the Fence Assembly to the Router, as shown in Figure A.
  • Page 10 Circle Cutting Use the center hole in the Fence as a pivot point when cutting circles. 1. Install the Fence as shown in Figure C. 2. Set the distance from the center hole in the Fence to the far edge of the router bit equal to the radius of the circle.
  • Page 11 General Operating Instructions 1. Make sure that the Power Switch is in Note: The router bit rotates clockwise. the off-position, then plug in the tool. Adjust for this while cutting: a. For most materials it is best to move the Router 2.

  • Page 12: Maintenance

    Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Power Switch is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.
  • Page 13 Troubleshooting Problem Possible Causes Likely Solutions Tool will not start. 1. Cord not connected. 1. Check that cord is plugged in. 2. No power at outlet. 2. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads.

  • Page 14: Parts List And Diagram

    Parts List and Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
  • Page 15 Assembly Diagram 10 11 12 Item 58253 For technical questions, please call 1-888-866-5797. Page 15...

  • Page 16: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

This manual is also suitable for:

58253