La Crosse Technology C85845v4 Quick Start Manual

Wireless Color Weather Station
Quick Start Guide
MODEL: C85845v4
DC:021720
Find your full manual and product information here:
POW E R U P
1. Insert 2 "AA" batteries into your Outdoor Sensor.
2. Insert the 5.0 Volt Power Cord into an outlet, then into your
Weather Station. Optional: Install 3 "AA" Batteries into your
station for backup.
3. Once the Sensor is reading to your station, place the sensor
outside in a shaded location to protect from sun's heat.
Watch sensor mounting video:
Outdoor Sensor
TX141TH-Bv3
ATOM IC T IM E S IGNA L-W W V B
• The station will search for WWVB Atomic Time Signal at UTC:
07:00 and if no reception was found, your station will search
again at 08:00, 09:00, 10:00 and 11:00.
• Press the SET button to start or stop a search for the WWVB
Atomic Time Signal.
• For information about WWVB Atomic Time visit:
bit.ly/laxtech_support
bit.ly/TH_SensorMounting
A A
A A
A A
Weather Station
C85845v4
bit.ly/AtomicTime
Page 2
SE T T I N G S
1. Hold the SET button to enter the Settings Menu.
2. Use the + or - button to adjust, and SET to confirm.
3. Press the SNOOZE/BACKLIGHT button at any time to exit.
Settings Menu Order:
• Language (English, Espanol)
• Beep ON/OFF
Time Zones
• Atomic ON/OFF
AST = Atlantic
• Time Zone
EST = Eastern
• DST ON/OFF
CST = Central
MST = Mountain
• 12H/24H time
PST = Pacific
• Hour
AKT = Alaska
• Minutes
HAT = Hawaii
• Year
• Month
• Date
• Fahrenheit/Celsius
Weekday: Weekday sets automatically as Year, Month and Date are
set.
Language: Whichever language is selected, the following instructions,
weekday, and month will appear in that language.
Atomic OFF: When Atomic OFF is selected, move directly to 12/24
hour time format.
I N D O O R | O UT D O O R CO M F O RT CH A RTS
• The Comfort Charts keep you informed when
humidity is at a comfortable level.
• The bar over the chart will move to indicate
the humidity level.
Page 3