Home Decorators Collection Smart Roller Shade Use And Care Manual page 8

Remote Control (continued)
Setting upper shade limits
①
Long press the [Channel setting]+[Up] buttons together for 4
seconds to enter setting mode for the upper limit. The motor will jig
and the LED will light up.
Setting lower shade limits
①
Long press [Channel setting]+[Down] buttons together for 4 seconds
to enter setting mode for the lower limit. The motor will jig and the
LED will light up.
4S
③
4S
③
②
Inch the shade by long pressing or short pressing the [Up] or [Down]
button to the desired upper limit position.
Hold the [Channel setting] button for 4 seconds to complete defining
the upper limit. Note that action must be completed within 3
minutes or the setting will time out.
②
Inch the shade by long pressing or short pressing the [Up] or [Down]
button to the desired lower limit position.
Hold the [Channel setting] button for 4 seconds to complete defining
the lower limit. Note that action must be completed within 3
minutes or the setting will time out.
8