Home Decorators Collection Smart Roller Shade Use And Care Manual page 7

Remote Control (continued)
Entering Setting Mode (For shades already paired)
4S
Inching Shade Up or Down (for setting upper and lower limits)
①
Whilst shade is in pairing mode (or if upper and lower limits have
not yet been set), short press the [up] button to have shade open
continuously.
②
Whilst shade is in pairing mode (or if upper and lower limits have
not yet been set), short press the [up] button to have shade open
continuously.
Only applicable for remote control that is already successfully paired with existing shades. Useful for
adjusting the top and bottom shade limits. On the remote control that has paired successfully, long
press the [channel setting] button of the remote control for 4 seconds. The motor of the shade will jig,
and the shade LED will begin flashing and shade will be sent into pairing mode.
③
Whilst shade is in pairing mode (or if upper and lower limits have
not yet been set), short press the [down] button to have shade close
continuously.
④
Long press the [down] button (for up to 15 seconds) for the shade to
move down continuously. Shade will stop when the button is let go
of.
7 Please contact 1-877-592-5233 for further assistance.
HOMEDEPOT.COM/HUBSPACE