Pre-Installation; First-Time Use - Home Decorators Collection Smart Roller Shade Use And Care Manual

Pre-Installation

PACKAGE CONTENTS
A
stepped tip
C Cʼ
F G
PARTS: Please identify the parts above required for installation of your Home Decorators Collection smart roller shade.
NOTE: Screws are provided for installation into wooden frames only. For wallboard or plaster please use the included plastic
wall anchors. For other surfaces such as metal or concrete please purchase appropriate screws and hardware.
TOOLS REQUIRED (Not included)
1 2

First-Time Use

Charging your shade
B
H
3 4
Part Description
Brackets A
A
(round pin hole)
Brackets B
B
(with rubber shock absorber)
Bracket cover with stepped tip
C
Bracket cover without stepped tip
Cʼ
Part
5
Blinking indicator light signals low battery or configuration mode when
setting button is pressed.
Prior to first-time use, the Hubspace smart shade may require up to 6
hours of charging. To charge your smart shade, connect the charger to
the charger socket on the motor interface and plug it into a wall socket.
Detach the charger once the shade isfully charged. Charger sold
separately.
4
Quantity Part Description
D Smart Shade
1
E Plastic hem slat
1
F Screws
1
G Anchors
1
H Remote
Description
1 Phillips Screwdriver
2 Measuring Tape
3 Pencil
Drill with 1/16"(1.6mm) and 3/16"(4.8mm) drill
4
bit (optional)
5 Level
D
E
Quantity
1
1
4
4
1