Table of Contents
Advertisement
1
Insert the USB storage device into the
socket.
2
Press USB on the remote control to select
the USB source.
» Play starts automatically. If not, press
.
Play from Bluetooth-enabled
devices
Note
•
The effective operating range between the system and
the paired device is approximately 10 meters (30 feet).
•
Any obstacle between the system and the device can
reduce the operational range.
•
Compatibility with all Bluetooth devices is not
guaranteed.
1
Press
to select Bluetooth source.
» [BT] (Bluetooth) is displayed.
» The Bluetooth indicator flashes blue.
2
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3
When [PHILIPS BTM20] is displayed on
your device, select it to start pairing and
connection.
» After successful pairing and connection,
the Bluetooth indicator turns solid
blue, and the system beeps twice.
11
EN
4
Play audio on your device.
» Audio streams from your device to this
micro system.
Tip
•
The system can memorize up to 5 previously
connected Bluetooth devices.
To disconnect the Bluetooth-enabled device:
•
Deactivate Bluetooth on your device; or
•
Move the device beyond the
communication range.
To clear Bluetooth pairing history:
Press and hold
for 3 seconds.
» The current Bluetooth connection is
disconnected.
» After successful clearing, [CLEAR] (clear) is
displayed for 3 seconds.
Play options
Control play
In CD or USB mode:
/
/
OK
Numeric buttons
Select an audio file;
Press and hold to
fast forward or fast
reverse the track during
playback, then release to
resume play.
For MP3/WMA tracks,
select an album or folder.
Start or pause play.
Stop play.
Confirm a selection.
Select a track directly.
Advertisement
Table of Contents
