Program Tracks; Play From Bluetooth-Enabled Devices - Philips BTM2460/85 User Manual

Program tracks

You can program a maximum of 20 tracks.
1
Stop play, and then press PROG/SCAN to
activate programming mode.
2
For MP3 tracks, press ALBUM/PRESET
to select an album.
3
Press / to select a track, and then
press PROG/SCAN to confirm.
4
Repeat steps 2-3 to program more tracks.
5
Press to play the programmed tracks.
• To erase the program, stop play, and
then press .
Play from Bluetooth-enabled
devices
Note
•
Before pairing a device with this unit, read its user
manual for Bluetooth compatibility.
•
Compatibility with all Bluetooth devices is not
guaranteed.
•
Any obstacle between the unit and the device can
reduce the operational range.
•
The effective operation range between this unit
and your Bluetooth enabled device is approximately
10 meters (30 feet).
•
The unit can memorize up to 8 previously connected
Bluetooth devices.
To enjoy music through the speaker wirelessly,
you need to pair your Bluetooth enabled device
with the unit.
EN
10
/
1
Press
source.
» [BT] (Bluetooth) is displayed.
» The Bluetooth indicator flashes blue.
2
On your device that supports Advanced
Audio Distribution Profile (A2DP), enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3
Select 'Philips BTM2460' on your
Bluetooth enabled device and if necessary
input '0000' as the pairing password.
» After successful pairing and connection,
the Bluetooth indicator turns solid
blue, and the unit beeps.
Philips BTM2460
/PAIRING to select the Bluetooth