Table of Contents
Advertisement
NLTroubleshooting
Malfunction
"E:35 / -10"
Voltage symbol
undershoot (double
bad point).
burns.
burns.
flashes.
All other error codes.
"E:30/-20"
Device not working.
42
Cause and Troubleshooting
Close the tap.
▶
Please contact customer service.
▶
→
"Customer Service", page 51
The Voltage Control System detects an impermissible
voltage drop.
No solution possible.
▶
Remark:When the supply voltage has stabilized, the
program continues normally.
Undervoltage can cause a program extension.
No solution possible.
Undervoltage can cause a program extension.
No solution possible.
Temperature is too high.
Wait for the temperature to drop.
▶
→ "program cancel", Page 32
▶
Water level is too high.
Select a suitable program for draining.
▶
→ "Programs", Page 25
Door is not closed.
▶
Close the door.
Laundry is wedged in the door.
Remove trapped laundry.
▶
Malfunction
Please contact customer service.
▶
→
"Customer Service", page 51
Solenoid valve defective.
Please contact customer service.
▶
→
"Customer Service", page 51
Detergent dosage is too high.
Reduce the amount of detergent for the next wash
▶
with an equal load.
Additional water filled.
▶ Do not fill the device with additional water during
operation.
Mains plug of the power cable is not plugged in.
Connect the appliance to the mains.
▶
Advertisement
Table of Contents
