Table of Contents
Advertisement
3.5 Diagnostics Page
The diagnostics page is primarily intended for manufacturing test and firmware debugging. There
two controls that may be useful to the user:
1. Power Level allows the user to offset the output power in approximately 3dB steps. There are
four selectable power levels. This may be useful when it is desirable to offset the power level
relative to the attenuator settings.
2. Chg (charge) Pump Current. This control change gain of the synthesizers internal loop filter.
The default charge pump current is 3. Using other charge pump currents can change the
frequency characteristics of the synthesizer's phase noise.
Figure 8 Configuration Manager Diagnostic page
Valon Technology 5009a Operations Manual – Version 1.38
Page 22
Advertisement
Table of Contents
