Configuration Manager List Page - Valon 5009a Operation Manual

Sweep/ Frac / Int; Set sweep mode to Fractional or Integer mode.
Sweep/Trigger Mode; Start sweep trigger modes are Auto (continuous sweep), Manual Trigger,
External Trigger, and External Step(See USER PORT).

3.4 Configuration Manager LIST page

Selecting List in the CM menu bar presents the frequency list tables for both sources. To edit the
table, click on the table entry and enter the desired frequency and attenuation.
Figure 7 List Page
The List page provides a convenient method for quickly selecting preset frequency and
attenuation setting. While in CW mode, clicking on any of the "radio" buttons in the Select
column, will program the synthesizer to the preset frequency and attenuation. When the Mode
is set to List, the synthesizer presets will be selected by the state of the USER PORT input (see
USER PORT for more details).
Valon Technology 5009a Operations Manual – Version 1.38 Page 21