Table of Contents
Advertisement
Seanet Pro Operation
Markers
Figure 7.5.
Adds A and B markers onto the sonar display, the range and bearing to each marker &
separation and relative bearing are shown.
Click on the symbol to deploy on the Marker panel and that marker symbol will be dropped
at the Origin (0, 0) on the Sonar display. Then, pick up the Marker using the left mouse button
and drag it to the position required.
Figure 7.6.
When both markers are dropped on the display, a line will be drawn which connects them.
The 'Delta' Range and Bearing at the bottom of the panel indicates separation and angle
between both Markers.
There are 4 sets of Markers that can be implemented; A-B, C-D, E-F, G-H. The operation of
each set is the same as A-B described above.
Display
Figure 7.7.
Sets up sonar display options.
DispMax – Tick to expand sonar display vertically to fit window. If un-ticked will expand
horizontally.
RngLab – Switch the Range Labels On / Off.
Rng Cross, Rings On, Rings, Grid On - Display Grid line options.
Document: 0685-SOM-00001, Issue: 12
60
Gemini Imaging Sonar
© Tritech International Ltd.
Advertisement
Table of Contents
