Table of Contents
Advertisement
Hardware Installation & Configuration
Impulse Titan
MKS-310-FCR
1
2
3
4
6
7
3.5.2. VDSL Cable
A VDSL connection requires only one twisted pair from the sonar to the surface.
Impulse Titan
MKS(W)-307-FCR
1
2
6
7
3.5.3. Burton 55A1-1506 (Auxiliary) Port Cable
An RS232 serial connection or TTL connection is possible to enable the use of an auxiliary
device or sensor connected in series with the Gemini head. A cable to connect to the
Auxiliary port is available from Tritech International Ltd with the following specification:
Document: 0685-SOM-00001, Issue: 12
Ethernet Cable Specification
Burton 55A1-1508
1
2
3
4
6
7
Minimum dynamic bend radius 130mm (static 36mm)
Note
The signal path should have a characteristic impedance of 110Ω (±10Ω) for the
entire cable run for optimal performance.
VDSL Cable Specification
Burton 55A1-1508
7
4
5
8
Minimum dynamic bend radius 129mm (static 35mm)
Note
It will be necessary to terminate this cable with an appropriate connector for the
sensor which is to be used.
Cable Colour &
Specification
Red UTP#2
(24AWG)
White UTP#2
(24AWG)
Blue UTP#1
(24AWG)
Red (20AWG)
White UTP#1
(24AWG)
Black (20AWG)
Cable Colour &
Specification
Black (20AWG)
Red (20AWG)
Blue UTP#1
(24AWG)
White UTP#1
(24AWG)
19
Gemini Imaging Sonar
Function
Ethernet RX +
Ethernet RX -
Ethernet TX +
DC +
Ethernet TX -
DC Ground
Function
DC Ground
DC +
VDSL +
VDSL -
© Tritech International Ltd.
Advertisement
Table of Contents
