iDataLink Maestro RR Install Manual page 140

INSTALLATION INSTRUCTIONS
DASH DISASSEMBLY
1. Unclip and remove the shifter trim panel. (Fig. 1.1)
2. Unclip and remove the U-shaped trim at the rear of shifter.
(Fig. 1.2)
3. (2017 and subsequent models ONLY): unclip and remove
the side panels of the center console. Remove the screws
exposed. (Fig. 1.3)
4. Unclip and remove the trim surrounding the center dash.
(Fig. 1.4)
5. Remove two (2) 7mm screws holding the radio and control
panel. Unclip, remove and unplug the radio and control
panel. (Fig. 1.5)
6. Remove four (4) 7mm screws holding the OEM screen.
Remove and unplug the screen. (Fig. 1.6)
7. Remove two (2) 7mm screws holding OEM the radio.
Remove and unplug the radio. (Fig. 1.6 )
8. Trim the plastic behind the OEM screen. (Fig. 1.7)
Keep screws and brackets for MFT1 dash kit assembly.
Unbox MFT1 dash kit and locate bracket set #2, discard
set #1.
Automotive Data Solutions Inc. © 2023
P1 /2
Fig. 1.1
Fig. 1.3
Fig. 1.5
Fig. 1.7
2
ADS-HRR(SR)-MFT1-DS-IG-EN
Ford Fusion with MyFord touch 2013-2016
Fig. 1.2
Fig. 1.4
Fig. 1.6
maestro.idatalink.com
3