Siemens SIMATIC IPC BX-39A Manual page 32

Configure firmware
2.6 "Power" tab
Firmware setting Value
USB Port 2 (X61) / Disabled
USB Port 3 (X62) /
Enabled
USB Port 4 (X63) /
Enabled with
USB Port 5 (X64 In-
Wake Capability
ternal 1) /
USB Port 6 (X64 In-
ternal 2)
USB Port 7 (X600
Disabled
RFID)
Enabled
Only with:
Enabled with
• IPC PX-39A
Wake Capability
• IPC PX-39A PRO
USB Port 7 (X600
Internal 3)
Only with:
• IPC BX-39A
USB Port 8 (X610
Disabled
Multitouch)
Enabled
Only with:
Enabled with
• IPC PX-39A
Wake Capability
• IPC PX-39A PRO
USB Port 8 (X610
Internal 4)
Only with:
• IPC BX-39A
USB Port 13 (X610
Disabled
Internal 5)
Enabled
Only with:
Enabled with
• IPC BX-39A
Wake Capability
32
Setting in deliv- Meaning
ery state
The affected USB port is not supplied with power.
x The affected USB port is only supplied with power during
operation. It is not supplied with power in sleep mode.
The affected USB port is supplied with power both during
operation and in sleep mode.
Depending on the setting for the "USB Ports Wake up during
S5" switch valid for all USB ports, the affected USB port can
either only wake up the device in sleep mode (S4) or can
wake it up both in sleep mode (S4) and after shutdown (S5).
The affected USB port is not supplied with power.
x The affected USB port is only supplied with power during
operation. It is not supplied with power in sleep mode.
The affected USB port is supplied with power both during
operation and in sleep mode.
Depending on the setting for the "USB Ports Wake up during
S5" switch valid for all USB ports, the affected USB port can
either only wake up the device in sleep mode (S4) or can
wake it up both in sleep mode (S4) and after shutdown (S5).
The affected USB port is not supplied with power.
x The affected USB port is only supplied with power during
operation. It is not supplied with power in sleep mode.
The affected USB port is supplied with power both during
operation and in sleep mode.
Depending on the setting for the "USB Ports Wake up during
S5" switch valid for all USB ports, the affected USB port can
either only wake up the device in sleep mode (S4) or can
wake it up both in sleep mode (S4) and after shutdown (S5).
The affected USB port is not supplied with power.
x The affected USB port is only supplied with power during
operation. It is not supplied with power in sleep mode.
The affected USB port is supplied with power both during
operation and in sleep mode.
Depending on the setting for the "USB Ports Wake up during
S5" switch valid for all USB ports, the affected USB port can
either only wake up the device in sleep mode (S4) or can
wake it up both in sleep mode (S4) and after shutdown (S5).
Firmware/BIOS description SIMATIC IPC BX-39A, IPC PX-39A, IPC PX-39A PRO
Operating Instructions, 01/2023, A5E51110693-AA