Table of Contents
Advertisement
Configure firmware
2.4 "Advanced" tab
2.4.7
"PCH-FW Configuration"
2.4.7.1
Level: "PCH-FW Configuration"
Note
Depending on the device type and the device configuration, the "PCH-FW Configuration"
submenu may not be visible.
Calling "PCH-FW Configuration"
Select: "Setup Utility (Page 10)" > "Advanced" > "PCH-FW Configuration".
Firmware setting
Value
Manageability Fea-
Disabled
tures State
Enabled
Disabled
•
AMT BIOS Features
Enabled
(only if "Managea-
bility Features
State" = Enabled)
2.4.7.2
"AMT Configuration"
Level: "AMT Configuration"
Calling "AMT Configuration"
Select: "Setup Utility (Page 10)" > "Advanced" > "PCH-FW Configuration" > "AMT
Configuration".
Firmware setting
Value
USB Provisioning of
Disabled
AMT
Enabled
24
Setting in deliv-
Meaning
ery state
IPC BX-39A
IPC PX-39A
IPC PX-39A PRO
x
The Intel® Manageability functions are disabled.
The Intel® Manageability functions are enabled.
Intel® Management Engine BIOS Extension (MEBx) is disabled.
x
Intel® Management Engine BIOS Extension (MEBx) is enabled and
can be used to configure the Intel® Active Management Technol-
ogy (iAMT) hardware.
Setting in de-
Meaning
livery state
IPC BX-39A
IPC PX-39A
IPC PX-39A PRO
x
The USB configuration (USB Provisioning) from Intel® Active
Management Technology (iAMT) is disabled.
The USB configuration (USB Provisioning) from Intel® Active
Management Technology (iAMT) is enabled.
Firmware/BIOS description SIMATIC IPC BX-39A, IPC PX-39A, IPC PX-39A PRO
Operating Instructions, 01/2023, A5E51110693-AA
Advertisement
Table of Contents
