Cleaning And Sanitation; Screen Locking - Advantech AIM-78H Series User Manual

2.6.1

Cleaning and Sanitation

AIM-78H should be cleaned and disinfected regularly to ensure compliance with
hygiene and sanitation regulations for healthcare facilities.
Instructions
1. Power off the device and unplug the power cable.
2. Wipe the screen and exterior of the device using only a soft cloth moistened with
water. Do not use liquid or aerosol cleaners on the screen as they can ruin the
finish and damage the screen.
3. To disinfect the device after use, wipe the LCD screen using only a soft cloth
dampened with 60% (or higher) isopropyl alcohol or ethyl alcohol. (Do not spray
any cleaning agents on the chassis.)
Caution! Do not use cleaning agents or disinfectants that contain phenol.
Do not autoclave or clean the device or peripherals using strong aro-
matic, chlorinated, ketone, ether, or ether solvents, sharp tools or abra-
sives.
Caution! Never immerse the device or peripherals in liquid. If the device is acci-
dentally exposed to liquid, immediately disconnect it from the power
source. Contact your IT department regarding the continued safety of
the device before placing it back in operation.
2.6.2

Screen Locking

1. On the home screen, swipe up to access the options menu. Tap the Settings
, and then select the Security option.
icon
On the Security option menu, select screen lock and configure the lock settings
2.
according to your preference.
13 AIM-78H User Manual