1. Manuals
  2. Brands
  3. Advantech Manuals
  4. PDA
  5. MIT-W102 Series
  6. User manual

Advantech MIT-W102 Series User Manual

Hide thumbs Also See for MIT-W102 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Mobile Computer
MIT-W102XXXXXXXXXXXXXXXX
User Manual
Ver 1.1
MIT-W102
1

Advertisement

Table of Contents
loading

Related Manuals for Advantech MIT-W102 Series

Summary of Contents for Advantech MIT-W102 Series

  • Page 1 Mobile Computer MIT-W102XXXXXXXXXXXXXXXX User Manual Ver 1.1 MIT-W102...
  • Page 2 Intended user group The primary users for the MIT-W102 series are professional healthcare personnel and general patient groups. It is appropriate for users aged between 18 and 55 to use the tablet and users’ weight and health are not relevant.
  • Page 3 Declaration of Conformity CE Conformity Statement Radio products with the CE alert marking comply with the RED Directive (2014/53/EU) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European Norms (in brackets are the equivalent international standards).
  • Page 4 Dispose of used batteries according to the manufacturer's instructions. Technical Support and Assistance Visit the Advantech website at http://support.advantech.com where you can find MIT-W102 User Manual I the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.
  • Page 5 – Product name and serial number – Description of your peripheral attachments – Description of your software (operating system, version, application software, etc.) – A complete description of the problem – The exact wording of any error messages Details of preparatory treatment or disposal Installation is only to be carried out by manufacturer authorized and trained personnel.
  • Page 6 d. The equipment does not work well or you cannot get it to work according to user manual. e. The equipment has been dropped and damaged. f. The equipment has obvious signs of breakage. 16. CAUTION: The computer is provided with a battery-powered real-time clock circuit.
  • Page 7 Delta ELECTRONICS CO LTD, model MDS-060AAS19 B. Output: 19Vdc, 3.15A max DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. In case of serious incident that has occurred, please contact the manufacturer and local authorities immediately.
  • Page 8 pas de détergents liquides ou en aérosol pour le nettoyage. 4. Pour les équipements enfichables, la prise de courant doit être située à proximité de l'équipement et doit être facilement accessible. 5. Gardez cet équipement à l'abri de l'humidité. 6. Placez cet équipement sur une surface fiable pendant l'installation. Le faire tomber ou le laisser tomber peut causer des dommages.
  • Page 9 du fabricant. 17. Si votre ordinateur perd du temps de manière significative ou si la configuration du BIOS se réinitialise aux valeurs par défaut, la batterie peut ne pas être alimentée. Mise en garde! 1. Ne remplacez pas la batterie vous-même. Veuillez contacter un technicien qualifié...
  • Page 10 Delta ELECTRONICS CO LTD, modèle MDS-060AAS19 B. Sortie: 19 Vdc, 3,15 A max AVIS DE NON-RESPONSABILITÉ: Cet ensemble d'instructions est donné conformément à la norme CEI 704-1. Advantech décline toute responsabilité quant à l'exactitude des déclarations contenues dans ce document.
  • Page 11 The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, heat above 40°C, or incinerate. Replace standard battery pack with Advantech MIT-W102-BATC Li-ion 11.1V 2860mAh. Use of another battery may present a risk of fire or explosion.

  • Page 12: Table Of Contents

    1.3 Package Contents ...................... 15 1.4 System Configuration ....................16 1.6 Exploring the MIT-W102 .................... 18 1.6.1 Front View ................18 1.6.2 Rear View ................19 1.6.3 Right View ................20 1.6.4 Left View ................20 1.6.5 Top View ................21 1.6.6 Bottom View ................
  • Page 13 5.1 Checking Battery Status ................... 42 5.2 Maintenance ....................... 42 5.2.1 Maintaining the Battery ............42 5.2.2 Maintaining the LCD Display ............43 5.2.3 Cleaning the MIT-W102 ............43 5.3 Trouble Shooting ..............43 Chapter 6 Dashboard and Hotkey setting ............. 47 6.1 Dashboard........................
  • Page 14 Chapter 1 Ready to Go Congratulations on your purchase of the MIT-W102 Rugged Tablet PC. This product combines rugged design with reliable performance and powerful functionality to best suit all your needs, in a wide range of working conditions. This user manual outlines all you need to know to set up and use your MIT-W102.

  • Page 15: Package Contents

    1.1 Symbols Used in this Manual Denotes information that must be observed. Failure to do so may result in personal harm or damage to the product. Denotes information that must be observed. Failure to do so may result in personal harm or damage to the product.

  • Page 16: System Configuration

    • MIT-W102 Tablet PC • AC power adaptor • Battery Pack Warning! To prevent electric shock, Do not remove cover. Warning! 1. Input voltage rated 100-250 VAC, 50-60 Hz, 1.5-0.75 A, Output Voltage rated 19 VDC , max 3.15 A 2.

  • Page 18: Exploring The Mit-W102

    1.6 Exploring the MIT-W102 1.6.1 Front View Component P1 – Programmable Button P2 - Programmable Button Front Camera Power button Connected to expansion module DC-in jack Docking connector Projective capacitive multiple touch screen I/O ports • USB 3.0 x 1 •...

  • Page 19: Rear View

    • Audio x 1 Connectivity LED indicator • Blue: when Wi-Fi is Turned on • Green: when BT is Turned on HDD LED indicator • Blinking blue: when hard disk drive is working Power / Battery LED indicator • Green: Battery is fully charged (>95%) •...

  • Page 20: Right View

    1.6.3 Right View Component Connected pin for expansion module 1.6.4 Left View Component I/O ports cover Audio Jack...

  • Page 21: Top View

    USB 3.0 USB 2.0 Micro HDMI 1.6.5 Top View Component Function buttons Built-in MIC Power button 1.6.6 Bottom View Component Docking connector AC-in jack...

  • Page 22: Chapter 2 Making Connections

    Chapter 2 Making Connections...

  • Page 23: Connecting The Power

    2.1 Connecting the Power Before you can use your MIT-W102, you must fully charge the battery. Connect the power adapter as shown and leave to charge for: • A minimum of 2 hours when using the internal battery Condition: the operation time is based on the LCD backlight at 50% and the average utilization of the system under 10%.

  • Page 24: Connecting Usb Devices

    2.3 Connecting USB Devices You can connect peripheral devices, such as a USB keyboard and mouse, as well as other wireless devices using the USB ports on the left side of the MIT-W102. 2.4 Connecting Headphones You can connect a pair of headphones using the headphone jack on the left side of the MIT-W102.

  • Page 25: Connecting A Microphone

    2.5 Connecting a Microphone The MIT-W102 features a built-in microphone, but you can still connect an external microphone if needed. Connect the microphone to the microphone jack on the left side of the MIT-W102 as shown.

  • Page 26: Chapter 3 Turning On

    Chapter 3 Turning On...

  • Page 27: Controlling The Mit-W102

    1. Press and hold the power button to turn on the MIT-W102. 3.1 Controlling the MIT-W102 3.1.1 Using the Touch Screen The MIT-W102 is equipped with touch screen technology, for ease of use when you are on the go. Simply tap the screen with your finger to select icons and run applications.

  • Page 28: Using The On-Screen Keyboard

    3.1.4 Using the On-Screen Keyboard 1. Press and hold on the taskbar. 2. Enable “show touch keyboard button”...
  • Page 29 3. Tap the icon on the taskbar to open the keyboard 4. Use your finger or stylus pen to tap and enter letters, numbers and symbols as you would with a regular keyboard. To type capital letters tap the lock icon on the on-screen keyboard.
  • Page 30 b. Select the handwriting icon. c. Use your finger and stylus pen to write on screen.

  • Page 31: Adjusting Screen Brightness

    3.1.5 Adjusting Screen Brightness 1. Tap on the right end of the taskbar to open the Action Center 2. Tap Brightness icon to adjust the brightness.

  • Page 32: Adjusting The Volume

    3.1.6 Adjusting the Volume 1. Tap the Volume icon on taskbar 2. Move the slide to adjust volume to tap the icon to mute...

  • Page 33: Chapter 4 Wireless Connections

    Chapter 4 Wireless Connections...

  • Page 34: Wi-Fi Connection

    4.1 Wi-Fi Connection Wi-Fi access requires a separate purchase of a service contract with a wireless service provider. Contact a wireless service provider for more information. The MIT-W102 comes pre-loaded with WLAN module; you can send and receive signals to a Wi-Fi network then synchronize files. A wireless network can be added either when the network is detected or by manually entering settings information.
  • Page 35 3. Available wireless access points will be shown once Wi-Fi is enabled. 4. Select the access point to connect with.
  • Page 36 5. You may be prompted to enter a Security key for secure access. 6. The wireless connection is negotiated and the icon in the notification area shows a connected status whenever a wireless connection is present. 7. Airplane mode can be enabled to turn off Wi-Fi...

  • Page 37: Bluetooth Connections

    4.2 Bluetooth Connections The MIT-W102 comes with built-in Bluetooth functionality that allows you to connect and communicate with other Bluetooth-enabled devices. 4.2.1 Setting Up Bluetooth Follow these instructions to set up a Bluetooth connection. 1. Type Bluetooth in Search and tap “Bluetooth and other devices settings” 2.
  • Page 38 3. When enabled, Bluetooth icon will be shown on the taskbar 4. Add more Bluetooth device by clicking on the icon “+”...
  • Page 39 5. Select “Bluetooth” 6. Select the Bluetooth device to connect from the available device menu...
  • Page 40 7. Comparing MIT-W102 with the Bluetooth device with Pass Key Entered 8. The Bluetooth device is successfully connected with MIT-W102 when the process is completed. It is recommended that you use a passkey to prevent unauthorized access to your MIT-W102.

  • Page 41: Chapter 5 Advance Setting

    Chapter 5 Advance Setting...

  • Page 42: Checking Battery Status

    5.1 Checking Battery Status As it is likely you will be using your MIT-W102 when out and about, it is important that you monitor the battery status regularly, to ensure you do not run out of power at a critical moment. 1.

  • Page 43: Maintaining The Lcd Display

    Power on LED off but DC power plug in. Any other LEDs ON but system cannot work. Contact your distributer, sales representative, or Advantech’s customer service center for technical support if you need additional assistance. Please have the following information ready before you call: Product name and serial number.
  • Page 44 Guidance and manufacturer’s declaration – electromagnetic emissions The model MIT-W102 SERIES is intended for use in the electromagnetic environment specified below. The customer or the user of the model MIT-W102 SERIES should assure that it is used in such an environment. Electromagnetic environment –...
  • Page 45 Guidance and manufacturer’s declaration – electromagnetic immunity The model MIT-W102 SERIES is intended for use in the electromagnetic environment specified below. The customer or the user of the model MIT-W102 SERIES should assure that it is used in such an environment. Compliance Electromagnetic environment –...
  • Page 46 To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the model MIT-W102 SERIES is used exceeds the applicable RF compliance level above, the model MIT-W102 SERIES should be observed to verify normal operation.

  • Page 47: Chapter 6 Dashboard And Hotkey Setting

    Chapter 6 Dashboard and Hotkey setting...

  • Page 48: Dashboard

    6.1 Dashboard Click on the shortcut to launch the dashboard 6.2 NFC 6.2.1 NFC application Click NFC icon to launch the application...

  • Page 49: Nfc Setting

    6.2.2 NFC Setting (1) Select COM port number 2 (2) Open Port...
  • Page 50 (3) Select Card Type (4) Polling Start...

  • Page 51: Nfc Usage

    6.2.3 NFC Usage NFC card can be detected when approaching the right hand side of the device Camera (1) Click Camera icon Default Rear Camera mode on the UI...
  • Page 52 Switch Front / Rear Camera (Click camera icon to switch camera) Video Recording . Click video icon...
  • Page 53 (5) Click setting icon to change file name and path.

  • Page 54: Brightness

    Brightness Click Brightness icon to adjust brightness...

  • Page 55: Hotkey Setting

    Hotkey Setting Click Hot Key Mode Setting and select function. E.g.: Set P1 key as WiFi ON / OFF key.

  • Page 56: Appendix Specifications

    Appendix Specifications...

  • Page 57: Specifications

    V2.1+EDR system built-in with integrated antenna 2.0M Fixed Focus Camera at front Camera 5.0M Auto Focus Camera with Flash LED at rear Rechargeable Li-ion battery (Advantech MIT101-BATC) Main Battery Standard battery, 11.1V, 2860 mAh, 3S2P AC Adapter: AC 100V-250V 50/60Hz,1.5A(max) Medical Power Adapter Output : 19Vdc/3.15A(max)/60W, Auto Sensing/Switching...
  • Page 58 Feature Description 1. Password security Security 2. TPM 2.0 One USB 3.0/ 2.0 One USB 2.0 One HP/MIC combined jack I/O Ports One Micro HDMI type D One DC-in jack One Expansion port 8-pin One Docking port 32-pin Audio Output One 1 watt speaker 295 x 196 x 20mm Physical...

  • Page 59: Optional Accessories

    LED Status Internal Green Amber Remark on/off adapter Battery System Off Battery is charging Battery is fully charged (100%) Battery is charging Battery is fully charged (100%) Battery Low (< 10 %) A.2 Optional Accessories A.2.1 External Battery You can use an external battery to extend the power of your MIT-W102. Battery specification: 2860 mAh, 11.1V A.2.1.2 Installing the External Battery 1.

  • Page 60: Office Docking Station

    2. Lock to secure the battery once it is properly to be inserted. A.2.1.2 Removing the External Battery Repeat the above steps in reverse order to remove the battery. A.2.2 Office Docking Station You can use the office docking stand to dock the MIT-M101 when you are at your home or on your office desk.
  • Page 61 Attach the MIT-M101 to the docking stand as shown. To charge the external battery, attach the battery to the docking stand as shown below. The external battery can also be charged when installed on the MIT-M101.
  • Page 62 A.2.2.1 Docking Connectors See below for the rear view of the docking and a description of all ports and connectors. Component Function Power jack Connect an RJ-45 cable to access LAN connection. LAN port Connect a serial cable to connect to another PC. USB port Connect USB connectors to transfer data.
  • Page 63 Function Lock mechanism (quick load/unload) USB port Microphone jack Headphone jack (Earphone Jack) Dock detection LED Battery bay status LED A.2.2.2 Connecting Power to the Docking Connect the AC power adapter to the docking and the mains as shown below. A.2.2.3 Docking Specifications Feature Description Feature...

  • Page 64: Vesa Docking Station

    A.2.3 VESA Docking Station You can use the VESA docking station to dock the MIT-W102 to the place where you need via standard 75 x 75 mm VESA hole on rear side. When docked, you can transfer data from your MIT-W102 to another PC by COM port or USB port. Attach the MIT-W102 to the docking stand as shown.
  • Page 65 Component Function Power jack Connect the AC adapter to provide power. LAN port Connect an RJ-45 cable to access LAN connection. VGA port Connect to display for 2 display output COM port Connect a serial cable to connect to another PC. USB 2.0 port x 2 , Connect USB connectors to transfer USB port data.

  • Page 66: Adjustable Stand (With The Hand Strap)

    A.2.3.3 Docking Specifications Feature Description Feature Description Product Name MIT-W102 VESA Docking Model Number MIT-W102-ACCVD One LAN port One COM port External I/O Interfaces One VGA port Two USB 2.0 host connectors One DC-in AC Adapter: AC 100V-250V 50/60Hz,1.5A(max) Power Output : 19Vdc/3.15A(max)/60W Physical Size 224.7 (H) x 200 (W) x 56.4 (D) mm...
  • Page 67 A.2.4.1 Attaching the Adjustable Stand 1. Fasten four screws to attach the 3-in-1 multi-functional back cover to your MIT-M101 with or without rubber bumpers attached to the tablet. 2. Pull to adjust the stand to desirable angle.
  • Page 68 A.2.4.2 How to install the hand strap on the stand 1. Pass the end of the hand strap through the outer hole on each side of the stand 2. Pass the end of the hand strap through the inner hole on each side of the stand and stick the hand strap together 3.

  • Page 69: Rubber Bumper

    A.2.5 Rubber Bumper A.2.5.1 Installing the Rubber Bumpers To protect the housing case of MIT-W102, install the rubber bumpers. 1. Install the rubber bumpers on the left and right side of the MIT-W102. 2. Make sure the rubber bumpers are aligned and locked on the indents. 3.
  • Page 70 A.2.5.2 Removing the Rubber Bumpers 1. Unscrew the rubber bumpers from the rear of the tablet PC. 2. Remove the rubber bumpers on the left and right.

  • Page 71: Installing Ssd

    A.3 Installing SSD Inserting SSD You can insert an SDD to store data, which needs to be later transferred to another machine, or to simply expand the storage capacity of the MIT-W102. 1. Open the SSD card compartment cover. 2. Insert the SDD, facing upwards, until it clicks into place. Screw and fix SSD 3.
  • Page 72 4. Close the SDD compartment cover. Removing SSD 1. Open the SSD compartment cover. 2. Unscrew and remove the shielding case...
  • Page 73 3. Unscrew and remove SSD from the slot. 4. Close and screw the SSD card compartment cover.

Table of Contents